Thermodynamic Y Steam Trap

Thermodynamic Steam Trap has only one half floating ball barrel as the moving part, with the opening facing downward. The barrel is both the opening and closing part and the sealing part. The whole spherical surface can be sealed, with long service life, water hammer resistance, no wearing parts, no fault, durable, and no steam leakage. The back pressure rate is greater than 80%, which can drain the saturated temperature condensate, the minimum undercooling is 0 ℃, and there is no water in the heating equipment, so that the heating equipment can achieve the best heat exchange efficiency.
Thermodynamic Steam Trap is just started, the air and low temperature condensate in the pipeline enter the Thermodynamic Steam Trap through the launching tube, the bimetallic strip emptying element in the valve pops the ball barrel open, the valve opens, and the air and low temperature condensate are quickly discharged. When the steam enters the barrel, the barrel will generate upward buoyancy. At the same time, the temperature in the valve will rise, the bimetallic strip emptying element will shrink, the bulb will float to the valve mouth, and the valve will close. When the steam in the drum becomes condensed water, the drum loses buoyancy and sinks down, the valve opens, and the condensed water is discharged quickly. When the steam enters the ball barrel again, the valve will be closed again, working intermittently and continuously