Ball Float Steam Trap WCB Stainless Steel

The structure of Ball Float Steam Trap is simple. There is only a stainless steel hollow floating ball finely ground by a moving part inside, which is both a float and a hoist. It has no vulnerable parts and has a long service life. The YQ trap is equipped with Y series automatic air exhaust device inside, which is very sensitive, can automatically exhaust air, and has high working quality.

When Ball Float Steam Trapt is just started, the air in the pipeline is discharged through the Y series automatic air exhaust device, the low-temperature condensate enters the drain valve, the condensate level rises, the float rises, the valve opens, the condensate is discharged quickly, the steam enters the equipment quickly, the equipment heats up rapidly, the temperature sensing liquid of the Y series automatic air exhaust device expands, and the automatic air exhaust device is closed. The drain valve starts to work normally, the float rises and falls with the condensate level, and the steam is blocked and drained. The valve seat of the free floating ball trap is always below the liquid level, forming a water seal, without steam leakage, and with good energy-saving effect. The minimum working pressure is 0.01Mpa, and the range from 0.01Mpa to the maximum working pressure is not affected by temperature and working pressure fluctuations, and the water is drained continuously. It can drain saturated temperature condensate, with the minimum undercooling of 0 ℃. There is no water in the heating equipment, so that the heating equipment can achieve the best heat exchange efficiency. The back pressure ratio is more than 85%, which is one of the most ideal drain valves for production process heating equipment